| ATV Models |
|
The Nymboida and the Barcoo models can be easily adapted to be towed by your ATV or for transporting your ATV.
The collapsible mesh deck inserts into the mounting points in less than 1 minute and allows you to transform your boat trailer into an all purpose ATV and utility trailer. You can then load your ATV onto the deck to be towed legally on the road with your vehicle. No ramps needed as the pivot in the "A" frame allows the back of the trailer to drop almost to the ground. During the loading of your ATV the trailer "A" frame will realign to the correct position for locking the A frame straight as the weight of your ATV comes forward on the trailer You can carry the collapsed trailer and deck on your luggage rack of your ATV when getting to your favourite hunting grounds. Then once you have your hunting trophy, you can load it onto the trailer by using the winch and transport it back to camp or home. The deck also transforms your trailer into a recovery trailer for ATV's. The Deck has so many uses for the man on the land. It can cart almost any load up to 600lbs and the mesh deck gives you multiple tie down points. We have not compromised on strength on the deck. We know that if you are going to load your favourite toy in there, you need to know it will be safe Our latest ATV deck is now ready for production. Through our intensive testing over the past few months, we have made minor adjustments to our design. This now provides a very stable deck that will allow the loading of either an ATV or two single motor bikes. The front tie downs extend outward to provide a better tie down angle. When retracted they only extend ½ inch outside the main frame. The deck size is 50" W x 82" L when open and attached to the trailer The deck size collapsed for storage is 50" L x 8" W x 29" H.
|

